7
PULSE
1. Press and hold the LOCK/UNLOCK button.
2. Then press and hold the ON/OFF button.
3. Repeatedly press and release the ON/OFF button while continuing to
hold down the LOCK/UNLOCK button to PULSE until ingredients
reach desired consistency.
CLEANING AND MAINTENANCE
Always unplug the Smart Stick
®
Two-Speed Hand Blender before clean-
ing. Clean thoroughly after using.
Remove the blending shaft from the motor body. Clean the motor body
only with a sponge or damp cloth. Do not use abrasive cleaners which
could scratch the surface. To clean the blending shaft, wash by hand in
hot water using mild detergent.
DO NOT USE DISHWASHER.
Never immerse the motor body in water.
If the appliance has malfunctioned or has been dropped or damaged in
any way or is not operating properly, return the appliance to the
nearest Cuisinart Repair Center for examination, repair or mechanical
or electrical adjustment.
TIPS AND HINTS
1. Liquid should not come closer than 1 inch from where the shaft
attaches to the motor housing.
2. When using with a nonstick cooking surface, be careful not to scratch
the coating with the edge of blender blade guard.
3. Do not immerse motor body housing in water or any other liquids.
4. Cut solid foods into ½-inch pieces for easier blending.
5. Pour liquid ingredients into the mixing cup first, unless recipe
instructs otherwise.
6. Never operate the hand blender continuously for longer than 1
minute. For best results, allow 20–30 of seconds rest time in between
1-minute cycles.
7. To avoid splatter, be sure the protective blade guard on the blending
shaft remains submerged in the liquid while blending. Never remove it
from the liquid while the motor is running.
8. Do not let hand blender stand in a hot pot on stove while not in use.
9. Do not put fruit pits, bones, or other hard material into the blending
mixture, as these are liable to damage the blades.
10. Do not fill mixing containers too full. The level of mixture will rise
when blending, and can overflow.
