22
CARE AND MAINTENANCE
Cleaning Main Burner
To prevent flash backs and good performance of burner, the procedure below should be followed at least
once a month in late summer or early fall when spiders are most ac�ve or when your griddle has not been
used for a period of �me:
1. Turn off at control knobs and LP cylinder.
2. Remove the griddle surface.
3. Remove the screws from the rear of the burners. Detach igni�on wire from the igni�on pin by hand only.
DO NOT use tool. Then Li� burner slowly.
4. Check all burner ports are clear of clogs. Use of a pin or paper clip works well.
5. Ensure the end of the burner and primary air screen are clear from insect nests, dirt or debris. Using a bent
s�ff wire in the shape of a hook , or a bo�le brush, run it through the burner tube and inside several �mes to
remove any debris.
6. Inspect each burner for damage (cracks or holes) and if such damage is found, order and install a new burner.
Summary of Contents for CGG-0028
Page 7: ...7 EXPLODED VIEW...
