Cuisinart C550S, Assembly Manual

Page: 8 / 9

12 13
Place the heat shield (CG) into the groove which
is located at the back side of the front panel as
shown in figure A. Next, attach the heat shield
(CG) to the upper back panel (BI) by using the self
tapping screw (x2), as shown in figure B.
First place the flame tamers (BF) and then the
cooking grates (BG) into the burner box.
Place the warming rack (BH) onto the burner box.
BF
CG
dH
de
Bi
BH
BG
Back view
A
B
AssEMBLY instR inst inst uCtions
14
15
13
YOu wIll NEED:
9
AssEMBLY instR inst inst uCtions
b. using the wing nut provided, assemble the side
burner (CM) to the side burner drip pan (CK), as
shown in figure C.
c. Attach the end of the side burner electrode
wire (CN) to the underside of the side burner
electrode, as shown in figure D.
Ensure that the wire is pushed in firmly.
a. use the side burner Venturi clip (#14) to
connect the side burner to the side burner
valve.
Cn
14
CO
d
d. Place the side burner cooking grate (CO) into
postion on the side burner shelf, as shown in
figure E.
YOu wIll NEED:
YOu wIll NEED:
13
14
X 2
X 1
X 1