11
5.3 Installing the gas tank
(The propane gas tank is not provided with the appliance.)
A propane tank complying with the requirements listed in section 5.2 must be obtained before the
grill can operate. Connect the LP tank to the grill outdoors only.
Read and follow all direction on the tank.
1. Turn burner control knob to “OFF” position.
2. Remove protective caps from tank valve and coupling nut, if present.
3. Open grill lid and fold right-hand grill shelf over onto grill grate
4. Grasp grill handle nearest to regulator with one hand, and with the other hand push the cylinder
into the threaded regulator connector. Turn clockwise until tight.
5. TIGHTEN BY HAND ONLY. Do not use tools.
REMOVAL OF THE GAS CYLINDER (please see 5.3 Installing the gas cylinder diagram)
1. Turn burner control knob to “OFF” position.
2. Grasp grill handle nearest to regulator with one hand, and turn tank counter-clockwise until it
comes off.
5.4 Checking for gas leak
DANGER
Check gas system for leaks to prevent fire or explosion hazard
1.
“Leak Check” must be performed before lighting grill and each time cylinder is connected for
use.
2.
Do not smoke or allow other sources of ignition in the area while conducting a leak test.
3.
Conduct leak test outdoors in a well-ventilated area.
4.
Do not use matches, lighters or a flame to check for leaks.
5.
Do not use grill until all leaks have been stopped. If you are unable to stop a leak, disconnect
propane supply, and call for gas application service or your local propane gas supplier.
