21
ASSEMBLY INSTRUCTIONS
20.
To assemble the Ceramic Heat Plates,
locate the following:
Put these parts aside for Step E:
3-pc. Stainless Steel
Radiant (BD)
Hitch Pin
Ceramic
Stone (BE)
Connector
a. Remove the 2 hitch pins and connectors
from the 3-pc. Stainless Steel Radiant (BD),
as shown in Figure A and B.
b. Detach the right and left frames from the top
of the stainless steel radiant (BD), as shown
in figure D.
A
D
Close up
Close up
X 4
X 2
X 32
X 2
B
C
ATTENTION:
For the purpose of safe
shipping and transit, the Stainless Steel
Radiants and the Ceramic Stones,
have been shipped separately, and
will require assembly. Use care when
handling the carton labeled Ceramic
Stones.
