22
23
FOR PROPANE MODELS ONLY.
For natural gas model, follow step 22.
a. Position the Regulator hose (CB) through the
hole in the Right Side Panel (EB).
b. Position the 20 lb propane tank onto the
bottom shelf (EC), and secure using the
bolt (F4) (already attached) located on the
underside of the bottom shelf, as shown in
figure B.
c. Attach the Regulator coupling nut to the LP
cylinder valve. Be careful not to cross thread.
Hand tighten only.
d. Perform Leak Test. See page 5 of the
Cuisinart
®
Safety and Care Manual.
ATTENTION:
For your families safety,
do not attempt to light this BBQ until
you have reviewed pages 4-7 of the
Cuisinart
®
Safety & Care Manual.
All Safety and Leak Test MUST BE
PERFORMED BY THE END USER,
prior to lighting this BBQ.
WARNING Do not store extra
propane tanks within BBQ cart.
ASSEMBLY INSTRUCTIONS
21.
CB
EB
EC
F4
A
B
ATTENTION:
For your families safety,
do not attempt to light this BBQ until
you have reviewed pages 4-7 of the
Cuisinart
®
Safety & Care Manual.
All Safety and Leak Test MUST BE
PERFORMED BY THE END USER,
prior to lighting this BBQ.
FOR NATURAL GAS MODEL ONLY.
a. Attach the Natural Gas Hose (CB) to the side
burner valve (CC) as shown.
b. Perform Leak Test. See page 6 of the
Cuisinart
®
Safety and Care Manual.
CB
CC
22.
ATTENTION:
In order to complete
installation of your Natural Gas BBQ
a 1/2” or 3/8” adapter may be required
to connect your BBQ’s Natural Gas
hose to your home gas supply.
Contact your Natural Gas supplier to
purchase the necessary part.
ASSEMBLY INSTRUCTIONS
