CUE CS0409 Page 3 Manual Download

Page: 3 / 4

www.cuesystem.com

Page 3 of 4

DS074_01

10.11.2011

Back Box

CS0409

Placing the Touch Panel into the Back Box

Hold touchpanel in the upright po-

sition and push it into the backbox

so that the thorns in the backbox

slide into the grooves in the metal

slat of the touchpanel.

This enables you to tilt the panel,

which holds in this position, and

mount cables.

If you want to place the panel in

the backbox, hold it upright and

push its bottom part strongly as

deep into the backbox as possible.

Then push the upper part of the

panel until the two metal catches

(západky – see fig.xx) slide into

the fixing tabs.

Step 1

Step 2

Step 3

Step 4

Summary of Contents for CS0409

Page 1: ...tions are subject to change without prior notice Page 1 of 4 DS074_01 10 11 2011 Back Box CS0409 134 8 189 45 8 4 5 3 Dimensions Description Wiring knockouts Thorns Fixing tabs Nuts for positioning of...

Page 2: ...ubject to change without prior notice Page 2 of 4 DS074_01 10 11 2011 Back Box CS0409 Back Box Cutout Back Box CS0409 Cutout Template 45 mm 30 mm 60 mm 45 mm 30 mm 60 mm 135 mm 179 mm 7 mm touchCUE 7...

Page 3: ...and push it into the backbox so that the thorns in the backbox slide into the grooves in the metal slat of the touchpanel This enables you to tilt the panel which holds in this position and mount cabl...

Page 4: ...ouch panel Hold the panel upright and pull its bottom part out In this position you can tilt the panel to mount cables If you need to remove the panel out completely hold it upright push downwards and...