CUE CS0409 Page 4 Manual Download

Page: 4 / 4

www.cuesystem.com

Page 4 of 4

DS074_01

10.11.2011

Back Box

CS0409

Taking the Touch Panel Out

Insert a thin screwdriver into each of the two little

holes on the sides of the touch panel and push

until the metal catches get loose.

Then you can tilt the upper part of

the touch panel.

Hold the panel upright and pull its

bottom part out. In this position

you can tilt the panel to mount

cables.

If you need to remove the panel

out completely, hold it upright,

push downwards and pull it out.

Step 1

Step 2

Step 3

Step 4

Adjusting the Panel on the Wall

If the touch panel does not adhere to the wall perfectly, you can adjust it in the following way. Take the

panel out of the back box and loosen the two nuts on the metal holder on the inside of the back box (the

one with thorns and fixing tabs). Then adjust the holder in a way to make the touch panel adhere neatly

to the wall.

Summary of Contents for CS0409

Page 1: ...tions are subject to change without prior notice Page 1 of 4 DS074_01 10 11 2011 Back Box CS0409 134 8 189 45 8 4 5 3 Dimensions Description Wiring knockouts Thorns Fixing tabs Nuts for positioning of...

Page 2: ...ubject to change without prior notice Page 2 of 4 DS074_01 10 11 2011 Back Box CS0409 Back Box Cutout Back Box CS0409 Cutout Template 45 mm 30 mm 60 mm 45 mm 30 mm 60 mm 135 mm 179 mm 7 mm touchCUE 7...

Page 3: ...and push it into the backbox so that the thorns in the backbox slide into the grooves in the metal slat of the touchpanel This enables you to tilt the panel which holds in this position and mount cabl...

Page 4: ...ouch panel Hold the panel upright and pull its bottom part out In this position you can tilt the panel to mount cables If you need to remove the panel out completely hold it upright push downwards and...