LIT-220 CUDA
®
(English)
3. ASSEMBLING THE HEADLIGHT SYSTEM
The headlight system consists
module.
Before continuing remove the protective lens cap.
Insert a fully charged battery into the Battery Holster and ensure it is fully seated down on
the connector at the bottom of the battery cavity.
To attach the power cable from the LED Module to the Battery Holster, insert the push
quick connector of the LED Module into the receptacle on the lead from the Battery Holster
until it clicks in place as shown here. This connection will not come off
engaged. You can rotate the connectors to find the keyway and then press together and
not damage the pins.
The On/Off switch is also the LED intensity control. Simply rotate the knob clockwise or
counter-clockwise to produce the desire
The headlight has an iris to allow adjustment of the beam spot diameter. Rotate the fluted
iris adjustment ring on the headlight clockwise or counterclockwise for the appropriate spot
diameter.
The battery holster is worn on a belt; on th
slips over and secures to a belt. The power cable secures into the cable clips on the side
and rear of the headband.
To remove the LED Module from the Battery Holster, press the small raised button on t
quick disconnect device located between the LED Module and the Battery Holster and pull
straight out without twisting.
Next, place the headband on your head; you can make size adjustments by turning the
knob on the rear of the headband until it feel
adjust the cross band.
(English) Date of Revision:
3. ASSEMBLING THE HEADLIGHT SYSTEM
The headlight system consists of a battery holster unit, mid-cable connector, and LED
Before continuing remove the protective lens cap.
battery into the Battery Holster and ensure it is fully seated down on
the connector at the bottom of the battery cavity.
To attach the power cable from the LED Module to the Battery Holster, insert the push
quick connector of the LED Module into the receptacle on the lead from the Battery Holster
until it clicks in place as shown here. This connection will not come off
engaged. You can rotate the connectors to find the keyway and then press together and
The On/Off switch is also the LED intensity control. Simply rotate the knob clockwise or
clockwise to produce the desired light output.
has an iris to allow adjustment of the beam spot diameter. Rotate the fluted
iris adjustment ring on the headlight clockwise or counterclockwise for the appropriate spot
The battery holster is worn on a belt; on the rear side of the holster is a metal belt clip that
slips over and secures to a belt. The power cable secures into the cable clips on the side
To remove the LED Module from the Battery Holster, press the small raised button on t
quick disconnect device located between the LED Module and the Battery Holster and pull
straight out without twisting.
Next, place the headband on your head; you can make size adjustments by turning the
knob on the rear of the headband until it feels comfortable. For more comfort you can
Rev. A
Date of Revision:09/01/17
Page 4 of 51
cable connector, and LED
battery into the Battery Holster and ensure it is fully seated down on
To attach the power cable from the LED Module to the Battery Holster, insert the push-pull
quick connector of the LED Module into the receptacle on the lead from the Battery Holster
until it clicks in place as shown here. This connection will not come off when positively
engaged. You can rotate the connectors to find the keyway and then press together and
The On/Off switch is also the LED intensity control. Simply rotate the knob clockwise or
has an iris to allow adjustment of the beam spot diameter. Rotate the fluted
iris adjustment ring on the headlight clockwise or counterclockwise for the appropriate spot
e rear side of the holster is a metal belt clip that
slips over and secures to a belt. The power cable secures into the cable clips on the side
To remove the LED Module from the Battery Holster, press the small raised button on the
quick disconnect device located between the LED Module and the Battery Holster and pull
Next, place the headband on your head; you can make size adjustments by turning the
s comfortable. For more comfort you can
