
51
www.cuckooworld.com
HOW TO CLEAN
ENGLISH
①
Visual inspection
•
check the entire circumference carefully for any crack or damage between
the Inner Pot lid and the pressure packing.
Since a badly assembled packing can cause the rice to be half-cooked or burned by steam leakage, double check
the packing thoroughly as described below.
(look for parts sticking out of the inner)
(look for parts sticking out of outer rim)
(look for parts sticking out of damaged parts)
③
Water boiling test
•
Pour water in the Inner Pot up to water level 2 (for “Rice”) and press the Menu/Selection button to select the self-cleaning mode.
Then push the Pressure Cook/Glutin. Turbo button.
•
Within 10 minutes, the pressure regulator weight will start rattling and hissing while emitting stream. If there is no steam coming out from the
pot other than through the pressure regulator weight the packing has been properly installed.
•
If steam comes out from other parts, stop the test and pull out the power cord. Wait until the pot cools down before removing the pressure
packing from the lid. Once reinstalled repeat the boiling test.
•
For a more precise water boiling test, you can wrap plastic around the circumference of the closed Top Cover. By doing so, you can easily
check where the steam leakage is.
•
If you still have a problem with reassembling the packing, please contact our Customer Service.
②
Physical inspection
•
Check if the pressure packing is thoroughly put
into the groove by rubbing the inside rime of the
packing with a finger around the entire circum-
ference as shown in the picture above.
•
Check if the pressure packing is properly put
into the groove of the Inner Pot lid by pushing
the outer rim with a finger around the entire cir-
cumference as shown in the picture.
•
Check if the pressure packing is thoroughly
put into the groove by pushing the inside of
the rim packing with a finger around the entire
circumference as shown in the picture.
How to double check whether the packing is well assembled
3
Normal
assembly
Abnormal
assembly
Normal
assembly
Abnormal
assembly
Summary of Contents for CRP-RT10 Fuzzy Series
Page 82: ...82 MEMO...
Page 83: ...83 www cuckooworld com MEMO...