Cuckoo CRP-PK1000S Series, Operating Instructions Manual, Page: 22 / 44

When the rice is not cooked. •
Press “Pressure Cook/Turbo” button is
pressed?
•
Is there power cut while in cooking?
•
Press the “Pressure Cook” button
once. And check “ ”sign on the display.
• Blackout backup power source for the Rice
Cooker, see page 13.
When the rice is not
cooked well. •
Did you use the measuring cup for the
rice?
•
Did you put proper amount of water?
• Did you rinse the rice before cooking?
•
Did you put rice in water for a long time?
• Is the rice old or dry?
•
Refer to page 12,18.
•
Add water about half the notch and then cook.
Rice is too watery or stiff. •
Is the menu selected correctly?
•
Did you properly measure water?
• Did you open the top cover before
cooking was finished?
•
Select the correct menu.
•
Properly measure water.
• Open the top cover after cooking finished.
When the water overflows. • Did you use the measuring cup?
• Did you use proper amount of water?
• Is it the menu selected correctly?
•
Refer to page 12,18.
When you smell odors while
warming. •
Did you close the top cover?
• Please check it the power cord is
plugged.
• Did it warm over 12 hours?
•
Is there any other substance such as rice
scoop or cold rice?
•
Close the top cover perfectly.
• Always keep the power on while warming.
• As possible, keep warming time within 12
hours.
•
Don’t warm rice with other substance.
“ ”
signs show up. • Temperature sensor does not work
properly. • Unplug the power cord and call the Service
center.
Warming passed time mark
blinks during keeping warm • 24 hours has not passed yet after keeping
warm • This function alarms if the rice remained warm
for more than 24 hours.
Rice has gotten cold or a lot of
water flow during keeping
warm • Keeping warm was set in “Sleeping”
mode • Keep warm after cancelling or setting “Sleep
Keeping Warm” mode depending on the
necessity
If “ ” sign appears.
• It shows on the display when pressing
“Start” button again, or when the
cooking has finished and you
’
ve never
turned the handle to ‘Unlock’.
• It can be solved by turning handle to ‘Unlock’
and then turn to ‘Lock’.
Case Check points Do the following
22
▼ If there is a problem with your cooker, check the following details before requesting service to your dealer. Sometimes
the cooker may not operate as desired if used incorrectly.
CHECK BEFORE ASKINg
FOR SERVICE