Cuckoo CRP-PK1000S Series, Operating Instructions Manual, Page: 19 / 44

TO KEEP COOKEd RICE WARm ANd TASTY
19
www.cuckooworld.com
E
N
g
l
IS
h
❶
Press the Auto Clean button for 3 seconds in the waiting mode to enter the
warming temperature setting mode. The display will show as seen in the
image. current keep warm temperature will show.
Controlling method of Warming Temperature
If the temperature in the rice cooker is not set properly, an odor or the color of the rice may change even though
it is cleaned frequently and boiled up. Temperature needs to be set.
❸
After setting the desired temperature, press Pressure Cook/Glutin Turbo or
Keep Warm/Reheat button to automatically input the selected temperature and
enter the waiting mode (if you press Cancel or do not operate for 7 seconds,
the function will be cancelled and go to the waiting mode.)
(When you press the Auto clean button, you will enter the customized Keep
Warm setting mode without saving the changed value.)
how to Operate my mode Function.
❷
Press Menu/Selection button so that the display shifts
1. When you smell bad odors and the rice is too watery: The keep warm temperature is too low. In this
case, increase the “Keep Warm” temperature by 1-2
℃
.
2. When the rice has a yellowish color or is too dry: The Keep Warm temp is too high. In this case
decrease the “Keep Warm” temperature by 1-2
℃
.
❶
Press the Auto Clean button for 3 seconds in the waiting mode (“ ”) displayed on the
number screen to go to warming temperature setting mode. Press the Auto Clean once to
enter the customized Keep Warm setting mode.
❸
Set the desired value and press Pressure Cook/Glutin Turbo or Keep Warm/Reheat
button to automatically input the set value and enter the waiting mode. (When you press
the Auto Clean button, you will enter the customized taste setting mode without saving
the changed value).
❷
Press the Menu/Selection button so that the display shifts
1. If too much water is spilled out when you open the lid : Press “Menu/Selection” button to raise the setting mode.
2. If the edge of rice is too soft : Press “Menu/Selection” button to reduce the setting mode.
<Keep warming> <Reheating>
having a meal
▶ If you want to have warm rice, press the “Reheat/keep”warm. Then “Reheat/keep”warm function will be started and you
can eat fresh rice in 9 minutes.
▶ The frequent use of the “Reheat” function may cause the cooked rice to be discolored or dried. Use it once or twice per day.
▶
If a separate heating appliance or gas burner is used to cook rice, put the cooked rice into the rice cooker and press the “Keep
Warm/Reheat” button to keep the rice warm. At this time, “ ” is shown on the display. (Like this, transferring hot rice to a cold
cooker may cause the rice to be discolored or develop an odor)
<Finishing reheat>
“ ” on display means that the
cooked rice has been kept warm
for 3 hours. The remaining reheat time will
show in minutes while the Keep
Warm light is blinking with the
“ ” sign on display twirling. When reheating is done, Keep Warm function
will start, and the amount of time that the Keep
Warm has been functioning will be displayed.
use it while opening the lid when there is too much water or rice becomes too soft.
device Temperature Control
or
or