Cuckoo CP-JN011W, User Manual

Page: 28 / 36

How To Replace the Filters
How To Replace the Filters (Use only the genuine CUCKOO Filters.)
Disassemble the Filter Guide and the
Filter, and replace the Filter. 8
Check if the Filter and the Filter Connector are placed at the proper position,
and fasten the Filter Cover and the Fixing Bolt.
If the Filter connecting direction does not agree with the picture, there is a risk of water leak.
Thus, please be careful.
9
Take out a Filter from the product,
and disassemble the Connector that
connects Filter
and Filter .
You can disassemble with your hands
without any separate tool.
7
If you do not let enough water pass through, it may affect the taste of water.
Close the Cover for Filter eplacement
at the bottom right of the product,
and fix it by tightening the screw.
You need to accurately fit the groove at
the bottom to smoothly.
You need a Phillips screwdriver.
10
Open the Tap Water Supply Valve, connect the power supply, and clean the
Filter by using the Automatic Filter Cleaning function. (Refer to page 25 for the
Automatic Filter Cleaning function.)
This product is exclusively for 220V-240V 50Hz. Please connect the product to the exclusive power outlet.
11
Open