Cuckoo CP-JN011W, User Manual

Page: 25 / 36

How To Use
www.cuckoo.com.my
How To Use the Drainage Function
Let the product enter the User Setting Mode by
pressing the Energy Save/Clock (Setting) button
for about three seconds in the Waiting status. 1
After the product has entered the User Setting
Mode, press the Non-Stop Flow/Button Lock
button.
The Voice Guide will say "Start Draining" and the product will
start the Drainage function.
The Display Panel will show the progress of drainage.
2
When the drainage is ended, the Voice Guide will
say "Draining completed" and the product will
enter the Waiting status. 3
During the drainage, if you press the Non-Stop Flow/Button Lock button pr the Out Flow
button again, the drainage will be ended forcibly. When the drainage is ended forcibly,
water may remain inside the Tank.
How To Automatically Clean Filters When Replacing Filters
Let the product enter the User Setting Mode by
pressing the Energy Save/Clock (Setting) button
for about three seconds in the Waiting status. 1
After the product has entered the User Setting
Mode, press the Out Flow button.
The Voice Guide will say "Start Auto Filter cleaning" and the
product will automatically clean the Filters.
The Display Panel will show the automatic cleaning time.
2
When the automatic filter cleaning is completed,
the Voice Guide will say "Auto Filter cleaning
completed" and the product will enter the Waiting
status where it can extract water. 3
In order to cancel the Automatic Filter Cleaning
function, press the Out Flow button during the
automatic filter cleaning.
The Voice Guide will say "Auto Filter cleaning stopped"
The time spent for the automatic filter cleaning differs according to
the temperature of the tap water, and may be five to 10 minutes.
4