Cuckoo CBT-I1030RW, User Manual

Page: 22 / 64

22
HOW TO INSTALL
How to Replace Remote Control Batteries
If the remote control appears to have its signal weakened during operation, this signifies the
batteries need to be replaced soon.
The remote control requires two AA batteries. Always ensure they are placed correctly
inside the remote.
Do not use a new battery together with an old battery.
Remove the remote control from the mount.
Lift the battery cover on the back of the remote control in the direction of the arrow to open it.
Take out existing batteries and insert new batteries according to the direction marked.
Replace the battery cover to the back of the remote control.
To check if the batteries have been successfully replaced, press the CLEAN button.
Press the STOP button once the LED screen on the remote illuminates.
Reinsert the remote control into the mount.
Battery Cover
Check List for Installation
When operating a remote control while two or more products are installed at a close distance to each other,
multiple products may be activated simultaneously.
In such cases, it is possible to configure the code of each product and its remote control so that a single remote
control can activate a single product only.
If you wish to apply this setting, please contact our Customer Service Center.