Copyright Reserved HyVISION System Inc.
This document is Quick Start Guide (151001,En). To improve quality of product, this could be revised without
prior notification or consent.
HyVISION System is not liable for any losses resulted from the use of the document or any errors or offering
.
4
The printer is packaged after LOT test of output conditions.
This testing may leave traces of usage on the heating bed, nozzle, etc.
Be assured that these are traces of testing, and that there is no problem with the product.
[1] Top door
Used for maintenance such as the filament replacement (loading /
unloading)
[2] Front door
Used to pull out the molded part
[3] LCD and operating buttons
LCD screen and touch buttons to operate printer
[4] Vent for filter fan
Internal air vent while filter fan operates.
[5] Interface part
Interface and power button.
[5A] Firmware switch
Switch for updating the firmware of printer.
[5B] SD Memory slot
Slot to insert SD Memory card.
[5C] USB input (Type-B)
USB input terminal to connect to a PC
[5D] Power switch
Power switch for the printer.
[6] Filament insertion hole
Hole to feed the filament into the printer.
[7] Spool holder mounting hole
Hole to hang the filament spool holder.
[8] Power input
Terminal to connect the cable of DC power adapter
External Printer Parts
5A
5B
5C
5D
3
4
1
2
5
6
8
7
