CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
32-20
Manual number TC10000AMM
Page: 2
Date: 04/17/08
1. GENERAL
The tail landing gear has a tail wheel assembly that swivels through 360 degrees and is
steerable via the rudder pedals. It is mounted to the fuselage with steel leaf springs.
2. MAINTENANCE PRACTICES
A. TAIL LANDING GEAR
(1) REMOVAL OF TAIL WHEEL AND LEAF SPRINGS
A - Nut
D - Clamp
G - Small Bolt (2)
J - Bolt
B - Washer (5)
E - Small Nut (2)
H - Large Area Nut (2) K - Short Bushing
C - Long Bolt
F - Small Washer (2)
I - Short Bolt
L - Long Bushing
Figure 32-20-1 – Tail Wheel and Leaf Spring Installation
(2-Hole Configuration Shown. Some hardware omitted for 1-Hole configuration)
