Cub Crafters CARBON CUB SS CC11-160, Maintenance Manual

Page: 32 / 356

CUB CRAFTERS, INC.
CC11-160 MAINTENANCE MANUAL
5.2
Manual number SSC10000AMM
Page: 2 Date: 04/18/2013
1. GENERAL
The location of any point on the aircraft is identified in a three axis grid as follows (Reference
Figure 5.2.1):

FS - Fuselage Station is a horizontal reference designation starting in front of the nose of
the airplane at a point 60 inches ahead of the wing leading edge.

WL - Water Line is a vertical reference designation measured parallel to the ground from
a point 38.53 inches below the center of the bolts that attach the landing gear to the
fuselage.

BL - Buttock Line is a horizontal reference designation starting at the airplane centerline.
When the aircraft i
s viewed from above, the letters “L” and “R” indicates whether the
point is to the left or the right of the centerline.

WS - Wing Station is measured outboard from the center of the respective wing
attachment bolt to the wing tip. The letters “L” and “R” designate left or right wing
respectively.