Cub Cadet Challenger 400 Series Operator'S Manual Download Page 1

Page: 1 / 20

Introduction • Safe Operation Practices • Controls & Operation • Product Care • Specifications • Warranty

WARNING

READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL

BEFORE ATTEMPTING TO OPERATE THIS MACHINE.

FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.

peratOr

’

anual

Form No. 769-14390B

(August 31, 2020)

NOTE:

This Operator’s Manual covers several models. Features may vary by model. Not all features in this manual are applicable to all

models and the model depicted may differ from yours.

Utility Vehicle

Challenger 400 Series 4x2

Introduction ............................................................. 2

Safe Operation Practices ........................................ 3

Controls & Operation .............................................. 7

Product Care ...........................................................12

Specifications ..........................................................17

Warranty .................................................................19

Table of Contents

Summary of Contents for Challenger 400 Series





















Search results

Summary of Contents for Challenger 400 Series

Reviews:

Related manuals for Challenger 400 Series

Brands by name

Popular brands

Cub Cadet Challenger 400 Series, Operator'S Manual

Search results

Summary of Contents for Challenger 400 Series

Reviews:

Related manuals for Challenger 400 Series

Brands by name

Popular brands