Optional Kit 490-900-C066 7 of 9 Form No. 769-10822 /00
45. When properly installed the dash cap will align as
shown in Figure 22 by the red dotted lines.
46. Make sure the front wheels are facing straight for-
ward prior to installing the steering wheel.
47. Position the steering wheel as shown in Figure 23,
then install the steering wheel onto the steering shaft until
it contacts the top of the steering shaft.
FIGURE 22
Upper Dash
Dash Cap
FIGURE 23
48. Install the 5/16-24 x 0.850” screw removed in Step 22
to secure the steering wheel to the steering shaft. Torque
the screw to 18-22 ft. lbs. (216-264 in. lbs.).
49. Install the steering wheel cap into the center of the
steering wheel. The steering wheel cap has three (3)
locking tabs with one being larger. The larger locking tab
is to be at the 6 O’clock position when installing into the
steering wheel. See Figure 29.
Large Locking Tab
Steering Wheel Cap
6 O’clock Position
FIGURE 24
50. Close the hood.
51. Connect the positive battery cable to the positive bat-
tery terminal, then connect the negative battery cable to
the negative battery terminal.
52. Turn the key to the on position, the new Bluetooth
®
enabled maintenance meter display should show the
hours.
53. Start the rider and confirm the Bluetooth
®
enabled
maintenance meter is functioning correctly.
NOTE: Connect the Bluetooth
®
enabled maintenance
meter to your smartphone by downloading the Cub
Connect
™
App for your Bluetooth
®
capable Android
or iOS device. See Page 9 for instructions