May 21, 2015
Bluetooth
®
Enabled Maintenance Meter Option
XT1
,
XT2 Enduro Series
or
RZT L/S
Models Without Factory Installed Bluetooth
®
enabled
maintenance meter.
BLUETOOTH
®
ENABLED MAINTENANCE METER
PURPOSE:
To offer those customers who did not purchase a model that had the Bluetooth
®
enabled maintenance meter installed at
the factory, the option to install a Bluetooth
®
enabled maintenance meter that works with CUB CONNECT
™
.
Models Affected:
Subject:
Date:
Model Years 2015 and After Production Only.
Serial Number
Range Affected:
490-900-C066
OPTIONAL KIT
NOTE:
These materials are prepared for use by trained technicians who are experienced in the service and repair of
equipment of the kind described in this publication, and are not intended for use by untrained or inexperienced
individuals. Such individuals should seek the assistance of an authorized service technician or dealer.
NOTE:
Always wear eye protection while servicing equipment. Wear hearing protection when appropriate. Always work
in a well ventilated area and follow all safety precautions when dealing with combustible materials.
NOTE:
Left (LH) and Right (RH) sides are determined from the operator’s position and facing in the forward direction.
ITEM
NO.
PART
NUMBER
QTY
DESCRIPTION
1
725-06221
1
METER-SVC MNDR/HOUR BLUE TOOTH
2
777I25270
1
LBL-SVC MNDR/HR MTR BLUE TOOTH
3
777I25406
1
LBL-SVC MNDR/HR MTR BTE RZT-S/L
490-900-C066 Kit Contents
Instruction sheet included with kit.
FIGURE 1
Optional Kit 490-900-C066 1 of 9 Form No. 769-10822 /00
725-06221
777I25406
1
3
NOTE: For RZT installation follow instructions on Pages 2-3. Estimated installation time 15 - 20 minutes.
NOTE: For XT1 or XT2 installation follow instructions on Pages 4-8. Estimated installation time 15 - 20 minutes.
NOTE: Installation time does not include steps (page 9) to activate / set-up CUB CONNECT
™
Mobile App.
RZT Label
777I25270
2
Rider Label
