background image

37

The provisions as set  forth  in this Warranty provide the sole and exclusive
remedy arising from the sale. CUB CADET shall not be liable for incidental
or consequential loss or damages including, without limitation, to any claim
for loss of profits, loss of savings or revenue, loss of the use of the
equipment or any associated equipment, facilities or service, downtime, the
claims or costs of third parties including customers, and injury to property,
and further including expenses incurred for substitute or replacement lawn
care services, for transportation or for related expenses, or for rental
expenses to temporarily replace a warranted product
.  (Some states do not
allow the exclusion or limitation of incidental or consequential damages, so the
above exclusion may not apply to you.)

In no event shall recovery of any kind be greater than the amount of the purchase
price of the product sold.  Alteration of the safety features of the product shall void
this Warranty.  You assume the risk and liability for loss, damage, or injury to you
and your property and/or to others and their property arising out of the use or
misuse or inability to use the product.

This limited warranty shall not extend to anyone other than the original purchaser
or original lessee.

How State Law Relates to this Warranty:  This limited warranty gives you
specific legal rights, and you may also have other rights which vary from state to
state.

Summary of Contents for 3186









































Reviews: