Cub Cadet 21131508, Operator'S Manual

Page: 5 / 32

5
We are pleased to have you as a PECO customer. Your
collection system has been designed to give you a low
maintenance, simple, and effective way to collect the
grass clippings from your mower. This manual is
provided to give you the necessary instructions to
properly mount and operate the collection system on
your mower. Please read this manual thoroughly.
Understand what each control is for and how to use it.
Observe all safety decal precautions on the machine and
noted throughout the manual.
1-1 Introduction
NOTE : all references made to right, left, front, rear, top
or bottom are as viewed from the normal operator’s
position on the mower.
The grass collection system is designed for turf
maintenance where there is a need to collect the grass
clippings as the mower cuts the turf. It is also used for
picking up leaves and in pre-season and post-season
clean-up. The blower, mounted on the right side of the
unit, uses a belt and gearbox system from the engine
PTO shaft. Drive train protection comes through belt
slippage. The blower draws grass clippings from the
discharge area of the cutter deck back to the (3) - 4
cubic foot collection bags P#(G0003) at the rear portion
of the mower frame. The operator can engage the
blower with a push of the over-center linkage on the right
side of the unit. Once the bags are full with clippings,
they can be released to make for easy dumping.
1-2 Description
Section I - INTRODUCTION AND DESCRIPTION
LZ Models: Collection system requires installation of added weight kit
59A30037150 (A1149) for safe operation! SZ models do not require a weight kit.
Refer to Section 2-21 in this manual for weight kit installation instructions.
Contact your Cub Cadet dealer to order weight kit 59A30037150 (A1149).