LTE-LINK SE user's Guide
17
Figure 5- 7 Synchronize network time
5.3.6 Request to connect to CUAV cloud server
After the time synchronization is successful, the device requests to connect to the CUAV
cloud server, and the status message on the screen interface changes from "wait time sync" to
"connect to server", shown as Figure 5-8.
Figure 5- 8 Connect to CUAV server
5.3.7 Successfully connected to the server
After the device is successfully connected to the CUAV Cloud server, the user can use
CUAV cloud's related ground terminal APP to connect to the link device to view the video or
control the flight controller.After successfully connecting to the server, the link device screen
interface status message information is displayed as "connection eatablish",At the same time, the
device indicates the network delay information area will display the delay time of the
communication between the current link device and the server in real time. The schematic
diagram of successful connection to the server shown as Figure 5-9.
