LTE-LINK SE user's Guide
23
The remaining space can not less than 512MB
5.7.2 Video mode
The LTE-LINK SE terminal link equipment supports two modes: active recording and
automatic recording,active recording is for the terminal link device user , to start or stop of the
recording can be controlled through the on/off button of the CUAV cloud ground terminal
APP;Automatic recording is the automatic recording mode set by the user. After the device is
powered on next time, it will automatically start recording according to the automatic recording
mode set by the user last time.
There are two modes of automatic recording of the equipment, automatic recording when
power-on and automatic recording when taking off.
When the automatic recording mode is turned on, the terminal link device will start
recording when it detects a video input when it is powered on, until the user manually
stops recording or the device shuts down.
When the aircraft takes off in video recording mode, the terminal link device will
determine the status of the connected flight control device in real time. When it detects
that the flight control has changed from the locked state to the unlocked state and there
is video input, it will start recording. When it becomes locked, recording stops.
If the recording is started successfully, the status message indication information on the
screen interface of the device will prompt "record start", shown as Figure 5-15. When the
recording normally end , the status message of the device screen interface will display "video
record success", shown as Figure 5-16.
Figure 5- 15 Video record start