EM00136493
rev. 1.0 EN
4
Control panel – KOMPACT DRP
+
To access the programming menu. (Press and hold down simultaneously for at least 3
seconds).
To start and stop the pump.
To disable the display notification in case of active level alarm condition (only alarm function),
flow alarm condition and memory.
In programming mode it functions as “enter”, to confirm the access and the changes to the
various menu levels.
To “escape” the various menu levels. Before exiting the programming mode you will be
prompted to save the changes.
Prolonged pressure displays the screen for the flow sensor calibration.
+
to change the contrast.
To scroll the menus or change the parameters in programming mode.
Prolonged pressure enables the priming.
Green LED flashes while dosing.
Red LED turns on in case of various alarm conditions.
CONNECTIONS DIAGRAM
Electrical connections
1
PT100 temperature probe input (see
the connection diagram)
2
3
4
Not Used
5
Pole -
pH or Redox
probe input (
pre-
wired with BNC )
6
Pole +
7
Level control probe input
8
9
Remote control input (start-stop)
10
11
Flow sensor input
12
2-wire PT100 connection diagram
3-wire PT100 connection diagram
Summary of Contents for 70692
Page 2: ...EM00136493 Rev 1 0 ...
