3. If the trunk is enabled then all the ports belong to that trunk need to be set in the
same virtual workgroup. For example:
<Assumption>
Trunk A is enabled (Trunk A includes port 1, 2, 13, and 14)
<VLAN setting>
When the virtual LAN is setup, the port 1, 2, 13, and 14 must belong to the same
VLAN groups.
Trunk Ports Configuration
CopyRight © 1999, 24 ports 10/100Mbps Switch
)
.%'
%'
%'
#%'
&%'
!%'
SAVE
EXIT
“TAB” Select item “SPACE” Toggle item
The Port Trunk screen includes six port trunk groups could be setup by administrator.
The port trunk group and UTP ports mapping is listed as below
When the port trunk is enabled, it could build up an 800Mbps bandwidth between
switch to switch connection.
Summary of Contents for SWH-2024D
Page 1: ......
Page 12: ...3 1 3 3 Network Application...
