After you login the console program successfully, the first startup screen will show as
below
CopyRight © 24 ports 10/100Mbps Switch Console Program (v1.00)
1.
Port Status/Configuration
2. Unit/VLAN Information
3. Trunk Ports Configuration
4. Password Change
5. Warm Start
6. Factory Reset
“TAB” Select item
There are six items listed in the main menu screen.
1. Port Status/Configuration
This item is used to check the current port status and setup the port configuration, like
full-duplex mode, NWay support, Back pressure and Flow control.
2. Unit/VLAN Information
The hardware version of the unit and the virtual LAN setting will display in this item
3. Trunk Ports Configuration
This item is used to setup the port trunk function. There are total six trunk groups
could be configured as following table:
Trunk Group
Trunk Ports
Trunk-A
1, 2, 13, 14
Trunk-B
3, 4, 15, 16
Trunk-C
5, 6, 17, 18
Trunk-D
7, 8, 19, 20
Trunk-E
9, 10, 21, 22
Trunk-F
11, 12, 23, 24
4. Password Change
Use this item to change the administrator's password
5. Warm Start
Select this item will reset the system
6. Factory Reset
This item will reset the system to the factory default setting
Summary of Contents for SWH-2024D
Page 1: ......
Page 12: ...3 1 3 3 Network Application...
