33
MCT-RACK(config-user-USERNAME)#
show
Show or verify the newly-created user
account’s information.
User command example
MCT-RACK(config)# user name miseric
Create a new login account “miseric”.
MCT-RACK(config-user-USERNAME)#
description misengineer
Add a description to this new account
“miseric”.
MCT-RACK(config-user-USERNAME)#
level rw
Set this new account’s access privilege to
“read & write”.
MCT-RACK(config-user-USERNAME)#
password mis2256i
Set up a password for this new account
“miseric”
2. Configure RADIUS server settings.
User command
Parameter
Description
MCT-RACK(config)# user
radius
Enable RADIUS authentication.
MCT-RACK(config)# user
radius radius-port [1025-
65535]
[1025-
65535]
Specify RADIUS server port number.
MCT-RACK(config)# user
radius retry-time [0-2]
[0-2]
Specify the retry value. This is the number of
times that the CHASSIS will try to reconnect
if the RADIUS server is not reachable.
MCT-RACK(config)# user
radius secret [secret]
[secret]
Specify a secret up to 30 alphanumeric
characters for RADIUS server. This secret
key is used to validate communications
between RADIUS servers.
MCT-RACK(config)# user
radius server1 [A.B.C.D]
[A.B.C.D]
Specify the primary RADIUS server IP
address.
MCT-RACK(config)# user
radius server2 [A.B.C.D]
[A.B.C.D]
Specify the secondary RADIUS server IP
address.
No command
MCT-RACK(config)# no user radius
Disable RADIUS authentication.
MCT-RACK(config)#
no
user
radius
radius-port
Set the radius port setting back to the factory
default.
MCT-RACK(config)# no user radius retry-
time
Set the retry time setting back to the factory
default.
MCT-RACK(config)#
no
user
radius
secret
Remove the configured secret value.
MCT-RACK(config)#
no
user
radius
server1
Delete the specified IP address.
MCT-RACK(config)#
no
user
radius
server2
Delete the specified IP address.
Show command
MCT-RACK(config)#show user radius
Show current RADIUS settings.
User command example
