16
Switch# copy-cfg
from tftp [A.B.C.D]
[file_name]
[A.B.C.D]
Enter the IP address of your TFTP server.
[file_name]
Enter the configuration file name that you
want to restore.
Example
Switch# copy-cfg from ftp 192.168.1.198 HS_0600_file.conf misadmin1 abcxyz
Switch# copy-cfg from tftp 192.168.1.198 HS_0600_file.conf
2. Restore the Management Ethernet Switch back to default settings.
Command / Example
Switch# copy-cfg from default
NOTE:
There are two ways to set the Management Ethernet Switch back to the factory
default settings. Users can use the
“
copy-cfg from default
”
command in CLI or simply press
the
“
Reset Button
”
located on the front panel to restore the device back to the initial state.
3. Restore the Management Ethernet Switch back to default settings but keep IP
configurations.
Command / Example
Switch# copy-cfg from default keep-ip
4. Backup a configuration file to TFTP server.
Command
Parameter
Description
Switch# copy-cfg to
ftp [A.B.C.D]
[file_name]
[user_name]
[password]
[A.B.C.D]
Enter the IP address of your FTP server.
[file_name]
Enter the configuration file name that you want to
backup.
[user_name]
Enter the username for FTP server login.
[password]
Enter the password for FTP server login.
Switch# copy-cfg to
tftp [A.B.C.D]
[file_name]
[A.B.C.D]
Enter the IP address of your TFTP server.
[file_name]
Enter the configuration file name that you want to
backup.
Example
Switch# copy-cfg to ftp 192.168.1.198 HS_0600_file.conf misadmin1 abcxyz
Switch# copy-cfg to tftp 192.168.1.198 HS_0600_file.conf
Summary of Contents for HES-3109 Series
Page 47: ...47 Restart DHCP service...
