CTS HES-3109 Series, User Manual

Page: 14 / 50

14
2.2.4 Login Username & Password
Default Login
When you enter Telnet session, a login prompt for username and password will appear to
request a valid and authorized username and password combination. For first-time users,
enter the default login username “
admin ” and “ press Enter key ” in password field (no
password is required for default setting). When system prompt shows “Switch>”, it means
that the user has successfully entered the User mode.
For security reasons, it is strongly recommended that you add a new login username and
password using User command in Configuration mode. When you create your own login
username and password, you can delete the default username (admin) to prevent
unauthorized access.
Forgot Your Login Username & Password?
If you forgot your login username and password, you can use the “reset button” to set all
configurations back to factory defaults. Once you have performed system reset to defaults,
you can login with default username and password. Please note that if you use this method
to gain access to the Management Ethernet Switch, all configurations saved in Flash will be
lost. It is strongly recommended that a copy of configurations is backed up in your local
hard-drive or file server from time to time so that previously-configured settings can be
restored to the Managed Switch for use when you gain access again to the device.