background image

14

Alarm signals

Alarm signal:

One (1) light and sound signal 

every 15 seconds 

for 5 minutes.

Cause:

Cooker guard warning that timer is in 
last 5 minutes.

Action:

Press control button to restart timer.

Alarm signal:

Five (5) light and sound signals

 in the course 

of 5 seconds.

Cause:

Anti-tamper function detects that sensor has been 
removed from bracket.

Action:

Replace sensor in bracket and press control button.

Alarm signal:

Two (2) light and sound signals 

every 5 minutes.

Cause:

Battery change necessary.

Action:

Change batteries. NB: Make sure you have new 
batteries to hand first (3 x AA).

Alarm signal:

Three (3) light and sound signals

 every 5 seconds 

and a steady red light between signals.

Cause:

Overheating.

Action:

Reduce temperature, or press control button to 
temporarily approve high temperature.

Alarm signal:

Two (2) light and sound signals

 and the cooker shuts off 

10 min. after use.

Cause:

Battery change necessary.

Action:

Change batteries. NB: Make sure you have new 
batteries to hand first (3 x AA).

Alarm signal:

Three (3) light and sound signals

 every 30 seconds.

Cause:

High temperature continuing after shut-off.

Action:

Reduce temperature, or press control button.

Summary of Contents for 6251635

















Reviews: