RadioPro IP Gateway
Installation and Configuration Guide NEXEDGE NX-57xx/58xx
35
5.
R
ADIO
P
RO
IP
G
ATEWAY
O
PERATION
5.1 Power-up
The Power Button can be used to power up or power down the unit by pressing it momentarily.
A watchdog circuit built into the IP Gateway monitors program operation. If the watchdog circuit detects that the
program is not functioning correctly, it will re-initialize the IP Gateway. This process may take up to two minutes.
During this process, RadioPro Dispatch, Solo, Talk, or Talk for Mobile clients will not have a connection or
communication with the Control Station radio.
5.2 Indicators
A blue LED located on the Power Button indicates that power is applied to the IP Gateway.
A red LED located internally, but viewable through the vents on the left side of the IP Gateway indicates the
functioning of the Hardware Watchdog as follows:
“Slow Blinking” (2 seconds per blink) indicates that the IP Gateway is rebooting. This will normally
occur for a maximum of two minutes after power-up.
“Steady” illumination indicates that the IP Gateway software and hardware is operating correctly, and
follows the “Slow Blinking” boot-up period.
“Fast Blinking” (1 second per blink) indicates that the watch-dog circuitry has detected a problem, and
that re-booting will commence within 5 seconds.