RadioPro IP Gateway
Installation and Configuration Guide NEXEDGE NX-57xx/58xx
31
h.
NEXEDGE tabs
When an IP Gateway has been licensed for use with a
NEXEDGE radio, the following tabs will allow parameter
input.
NEXEDGE Radio
tab
Enter the appropriate radio ID values for the fields on this tab.
GPS
tab
If mapping locations of subscribers is required, place a check
mark next to
Enable GPS Updates
. Since this option will
increase the amount of radio transmissions, leave this
unchecked if GPS mapping is not needed.
Then choose a
Minimum Poll Rate
to set the minimum time
between successive GPS updates. Increasing this parameter
will decrease the number of GPS updates, thereby allowing
more channel bandwidth for voice conversations.
8.
Write settings to the IP Gateway:
From the
Gateway
menu, click on Write Settings. Enter the Admin
Gateway Password
(factory
default password is “admin”), then close the configuration window for this IP Gateway.
Remove the Ethernet cable between the RadioPro IP Gateway and the local PC or laptop used for
configuration.