CTC Union STE-10, Operation Manual

Page: 23 / 36

Chapter 1: Configuration and Operation
19
When your settings are correct:
Select q) Previous Menu to return to the Mode Setting menu.
Select q) again to return to the Device Settings menu
Select h) Apply and Save Settings
You will get confirmation that the settings have been saved. Press
any key to return to the Device Settings menu.
After configuration, set the switch to "Normal" and reboot (power
off/on). The STE-10 will boot in terminal server mode and offer a
command line prompt to any attached terminal. Help will show the
available commands. Show Status will show the current settings.
STE-10>help
telnet
help ? save
change speed change parity change stopbits change charsize
change ipaddress change gateway change netmask show status
STE-10>show status
speed
<9600>
parity <NONE PARITY>
stopbits <1 STOP BIT>
charsize <8 BITS>
ipaddress <192.168.2.230>
gateway <192.168.2.254>
netmask <255.255.255.0>
STE-10>telnet 192.168.2.2
FreeBSD/i386 (FreeBSD.ctcu.com.tw) (ttyp1)
login:
In our example, we have made a telnet connection to a UNIX
host. The STE-10 will even access a host on a different network if the
"gateway" has been set.