CTC Union STE-10, Operation Manual

Page: 16 / 36

Chapter 1: Configuration and Operation
12
When selecting "f", the serial port protocol may be set as follows.
S E R I A L P O R T P R O T O C O L S E R I A L P O R T P R O T O C O L
a ) . F L O W a ) . F L O W C O N T R O L C O N T R O L < N O N E > < N O N E >
b ) . R E C E I V E D A T A O N L Y W H E N D S R O N b ) . R E C E I V E D A T A O N L Y W H E N D S R O N < D I S A B L E D > < D I S A B L E D >
q ) . P R E V I O U S M E N U q ) . P R E V I O U S M E N U
S E L E C T : S E L E C T :
From the SERIAL PORT PROTOCOL menu select "a".
F L O W C O N T R O L F L O W C O N T R O L
a ) . N O N E a ) . N O N E
b ) . R T S / C T S b ) . R T S / C T S
c ) . X O N / X O F F c ) . X O N / X O F F
S E L E C T : S E L E C T :
Select between RTS/CTS and Xon/Xoff handshaking, or none. Then,
from the SERIAL PORT PROTOCOL menu select "b".
R E C E I V E D A T A O N L Y W H E N D S R O N R E C E I V E D A T A O N L Y W H E N D S R O N
a ) . D I S A B L E a ) . D I S A B L E
b ) . E N A B L E b ) . E N A B L E
S E L E C T : S E L E C T :