CTC Union ecoflex, Installation And Maintenance Manual

Page: 40 / 60

40 CTC EcoFlex
End user information
Information texts
Operation data
Pellets switch Off
If the pellet burner is shut off, this is normally shown in the disply alternately
with the main menu. I.e. the pelletburner switch on the control panel is in
position ”0”
Water filled?
Confirm using OK
This text will be displayed in the first operationg hour after the voltage is
switched on. No function starts before you confirm that water has been
filled. If the system and the product have been filled with water, confirm by
pressing the ”OK” button.
Operation data
Power supplier control
Shows that power supplier control is active. Power supplier control uses
equipment which an electricity power supplier can install to disconnect high
power demanding electricity equipment by district for shorter periods of
time. The immersion heater is shut off by active power supplier control.
(Only Swedish version)
Operation data
High electric power demand
Reduced electrical power A
The house’s main fuses are overloaded.
The boiler’s (immersion heater) electrical power is therefore reduced.
(Only Swedish version)
Operation data
House heating off
Outdoor temperature xx °C
Shows that no heating is required in the house. The heating circuit pump is
shut off and the mixing valve remains closed. The pump is exercised daily
for a short period so that it does not jam. Current outdoor temperature is
also displayed.