ZHUHAI CTC ELECTRONIC CO. LTD
DIY PRINTER INSTALLATION AND OPERATION INSTRUCTION
1
Chapter 1 PREFACE
When you receive CTC DIY I3 printer, please check whether the package is in good
condition, and read the product specification carefully after open the package,
moreover, read and follow the paragraph with
LOGO strictly. Please check
whether the parts are in good condition and complete according to the packing list,
then, following the installation steps to assembly and testing the printer until a quality
product has been printed. After using period of time, there is a customer period
maintenance needed, furthermore, properly maintenance can extend the life of the
printer by several years.
The safety warning and attentions
To acquire an optimal 3D model, please use the appropriative material of CTC. The
warranty coverage would not be included if the printer needs a maintenance and
troubleshooting which caused by using the others’ print material, not CTC’s.
Please be sure the supply voltage is 110V or 220V in your area before power
connection, since users in different places use different supply voltage. You must
adjust the input voltage to match the voltage in your area, or the warranty coverage
would not be included if there is a fault caused by a wrong input voltage.
It is forbidden to touch the model, extruder, printing platform and the high
temperature parts inside of a printer when the printer is working or has just finished
work!
It is forbidden to touch the power, power interface, wires of the mainboard and
rotating fan when the printer is energized.
