ZHUHAI CTC ELECTRONIC CO. LTD
DIY PRINTER INSTALLATION AND OPERATION INSTRUCTION
18
Parts: NO.1 Smooth rod ×2, NO.34 Q Assembly
Smooth rod through outside holes of A4 plate (left and right) from up to down
independently, and through the outside bearing of Q Assembly, the outside holes of
A4 Assembly (NO.31) and A5 Assembly (NO.32).
Parts: NO.2 screw rod ×2;
Screw rod through inside holes of A4 plate (left and right) from up to down
independently, screw the screw rod in the inside hole of Q Assembly. Align and insert
the flexible coupling M5 and A4 Assembly with the extrude side of the motor on A5
Assembly.
Adjust the distance between left and right side of Q Assembly, to prepare for the next
correct assembled,as picture 25.
Adjust outer fringe
’
s horizon distance of both screw rod at nearly 320mm, which is
described as picture 27.
The fastening screws of the coupling of the fixed motor above are shown as picture
26.
Picture 25
Picture 26
Press the screw rod and
insert the flexible coupling
into the extrude side of the
motor of Z-axis.
