CST/BERGER LASERMARK 58-iLMXL, Original Instructions Manual

Page: 18 / 320

18 | English
1 609 929 T56 • 24.2.09
Technical Data
Assembly
Inserting/Replacing the Battery (see figure A)
Alkali-manganese batteries are recommended for the measuring tool.
– Remove the protective rubber sleeve 3 .
– Open the battery compartment 6 .
– When inserting batteries, pay attention to the correct polarity accord-
ing to the representation on the inside of the battery compartment.
– Always replace all batteries at the same time. Only use batteries from
one brand and with the identical capacity.
– Close the battery compartment and remount the protective rubber
sleeve on the measuring tool.
f
Remove the batteries from the measuring tool when not
using it for extended periods.
When storing for extended periods,
the batteries can corrode and discharge themselves.
Cross-line Laser 58-iLMXL
Max. working range 30 m
Aperture angle 120°
Levelling Accuracy
±
0.4 mm/m
Self-levelling range, typically
±
4°
Levelling duration, typically
≤
3 s
Laser class 2M
Laser type 635 nm, <1 mW
Tripod mount 1/4" x 20
Batteries 3 x 1.5 V LR6 (AA)
Operating life time, approx. 20 h
Weight according to EPTA-Procedure 01/2003 0.9 kg
OBJ_BUCH-929-003.book Page 18 Tuesday, February 24, 2009 1:42 PM