i
-Control User Manual
2 Getting
Started
2.1 Requirements
The minimum requirements to run
i
-
Control effectively are as follows:
Access to the network
Java enabled web browser. (Netscape 4.0 or higher & IE 5.5 or higher
recommended)
Java™ 2 Runtime Environment, Standard Edition, Version 1.4.2
(You may install this from http://java.sun.com/j2se/1.4.2/download.html)
Note: Read install_notes.txt & readme.txt for details on minimum system requirements to
install Java™ Runtime Environment Version 1.4.2
Note:
On Windows XP The "Internet Connection Firewall" must be disabled, or else UDP
Ports 30718 & 30704 must be available. Otherwise, you will not be able to detect or
communicate with any of the
i
-Control
devices on the network. To configure, go to the
Control
Panel, go to Network Settings, select the corresponding network adapter, choose Properties,
and go to the Advanced tab.
2.2 Hardware
Installations
Follow the steps given below:
Step 1: Connect the Ethernet connection to the unit
Step 2: Connect A/C power cord to the unit with no A/C power
Step 3. Connect your telephone lines to the two RJ45 connections at the front of the
unit.
Step 4: Turn A/C power on.
Diagrams below explain each connection.
2.2.1 Ethernet
Connections
Connect the RJ45 Ethernet connection to the network.
i
- Control
Network
i
-Control User Manual
- 2 -
30/04/2004
