i
-Control User Manual
By clicking on “Reset” on each section, values you entered are rolled back to its original
readings. By clicking on “Apply” the new settings are applied to
i
-
Control.
i
-
Control will reboot when you click “Apply”.
Note: You need to click on “Apply” for each subsection to make your changes apply. (i.e.
Device Settings, IP Settings or Password Settings). Each time you click on “Apply”
i
-Control
will reboot, thereby logging you out from
i
-Control. Allow about 10 seconds for
i
-Control
to be
active again. After a reboot
i
-Control
will always have its output status loaded with its last
known status.
You can logout from
i
-
Control by clicking the logout button.
If you close the browser you will be automatically logged out from
i
-
Control. If you stay
inactive for over 5 minutes you will be automatically logged out from
i
-
Control.
3.3 Security
Features
on
i-Control
3.3.1 Password
i
-
Control is secured by passwords at two levels:
i
-
Control Control Level
i
-
Control Configuration Level
The factory default password is set to be “password”. We recommend that you change it to a
desired password with at least four characters.
Note
i
-Control
passwords are case sensitive. The password is limited to a maximum number
of eight characters.
3.3.1.1
Forgetting the Password
If you have forgotten any of your passwords
there is a method to restore the factory
default passwords on
i
-
Control. This method
will reset both passwords back to
“password”.
However in order to minimise the risk of any
user taking advantage of this, you will need
to have physical access as well as network
access to
i
-
Control.
Method:
1. Go
to
http://192.168.1.222/resetsb.html
(replace IP address with your IP address)
2. Click on “Reset” and your count down will begin.
3. If you want you passwords to be set back to factory defaults you will need to unplug
i
-
Control before this count down is completed. The count down period is set to be one
minute.
4. If you do not unplug
i
-
Control before the count down is completed your passwords will
remain unchanged.
5. If you are unable to load the default passwords please contact Computer Support
Systems technical support.
i
-Control User Manual
- 8 -
30/04/2004
