Instructions for Use
Assist
X Mobil
|
29
EN
9. Settings
Menu
If the Receiver is in the Setup Menu mode and is receiving a call, the Setup
menu will be exit automatically. Changes will not be saved in this situation. As
long as there are active calls, it is not possible to enter the Setup Menu.
• Enter/exit Menu
Press
[OK]
Button 5 Sec. Exit the setup menu with
„Menu > Exit“
or the
[ON/OFF]
Button.
• Navigate Menu
To navigate through the setup menu use the
[+]
and
[-]
buttons.
Info menu
Here you can see the main information of the device like firmware version and
frequency.
Languages
Call up the menu and choose your language for the menu texts and messanges
on the display:
German / English / French
.
Subscribers (teach in new transmitters to the receiver)
Up to 32 transmitters can be connected to any number of receivers.
• Adding subscribers (Quick)
Press the
[+]
Button at the receiver until the LED will light up
purple
.
Hold the key
[+]
for 1 sec until the display shows the message
„Press Call
Button“
. Switch to the transmitter you want to teach in and press the
red
call button
. The receiver will confirm the new transmitter with
„Subscri-
ber added“
or
„Subscriber already exists“.
• Adding subscribers (Setup Menu)
Go to
„Menu > Subscribers > Add“.
