CSR Bradford SupaVent, Installation Manual

Page: 6 / 16

6
Installation - Tiled Roof
STEP 7
Lift or remove the formed
flashing.
Using a weather resistant
roofing silicone sealant,
apply a 15-20mm wide
bead of sealant around
the perimeter of the
flashing area.
Return the flashing to the
tiles ensuring no gaps
greater than 3mm are
present. Seal any gaps
along the front or side
with additional sealant.
STEP 8
Return the higher row of
tiles to the flashing.
These should have been
cut to provide a snug
fit which still allows the
throat of the ventilator to
fit onto the flashing.
Adjust the flashing to get
a good fit.
Ensure sufficient sealant applied in tile troughs. This helps
prevent any water entering from adjacent tiles.
Tiles can be temporarily removed to assist flashing fitment Tiles can be temporarily removed to assist flashing fitment
Apply Sealant Apply Sealant