CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS
USER'S MANUAL, VERSION 1.0.0
Copyright © Convergence Systems Limited, All Rights Reserved
74
5.6.2.4
CS208 Bootloader firmware upgrade via Ethernet
1. After CS208 RFID reader is power up, wait 1 minute.
2. In PC, Open Command Prompt and run ping test (“Ping 192.168.25.208” <- Default CS208
IP address). Check the network connection of CS208 reader.
3. “
CS208CommissioningAndFwUpgrade1.0.6
” is used for OS firmware upgrade. Run
CS208CommissioningAndFwUpgrade.exe (version 1.0.6) provided in the CS208 software
package. Wait until CS208 Serial ID is displayed (Around 30 seconds).