CSL CS208-3G INTELLIGENT INTEGRATED READER with GPS
USER'S MANUAL, VERSION 1.0.0
Copyright © Convergence Systems Limited, All Rights Reserved
39
Note:
1
= Internal GPS Antenna;
2
= External GPS Antenna
5.4.5.8
Test Buzzer Tone (SHIFT-8)
1.
In the menu, check “SHIFT-8: test Buzzer Tone”. The default value of Buzzer Tone
is 0 (There are 3 tones output sequentially, one for Read Tag 1 alert, one for Read Tag
2 alert, and one for Write Tag alert when you press “2” to test Buzzer with Buzzer
Tone value 0).
2.
If you want to test Read Tag 1 only, you can change the value of Buzzer Tone to “1”
with pressing “SHIFT” and “8” together.
3.
If you want to test Read Tag 2 only, you can change the value of Buzzer Tone to “2”
with pressing “SHIFT” and “8” together.
4.
If you want to test Write Tag only, you can change the value of Buzzer Tone to “3”
with pressing “SHIFT” and “8” together.
5.4.5.9 Burn-in
Program
(B)
1.
Press “B” to start the burn-in program. After start the burn-in program the
information come from CS208 is shown on the screen as below.
New GPS Antenna
