CSI SMR-700/800, Installation Manual

Page: 10 / 36

Power Supply is malfunctioning
X X X
(inside repeater)
Blinking Blinking Blinking
Checking Isolation Status
GREEN RED RED
Solid Off Off
Normal Condition at Start up
GREEN RED RED
Solid Off Off Insufficient distance (Isolation) exists between the DL
and UL Antennae. Remove power and re-install the DL
GREEN RED RED and UL Antennae to correct isolation problem.
Solid O f f Solid This condition is the Shut-Down Alarm: signal received
from cell tower is too strong (more than AGC range).
GREEN RED RED Relocate DL antenna to reduce received signal strength.
Solid O f f Blinking
PLL Lock Detected Failure Alarm.
GREEN RED RED
Blinking O f f O f f Repeater is non-functional. Contact
Customer Service Center.
GREEN RED RED
Alarm Interface
High NO + CC
1 NC, 2 NO, 3 CC
L o w NC + CC
Alarm Relay
- 6 -
Repeater Unit LED
Condition / Troubleshooting
Power ISO Alarm
Shutdown Signal Relay Status Remarks