-22-
If the user would like to modify RF configuration click on the words RF Configuration in the
navigation box and the screen below is displayed.
The user inputs the gain value desired. Gain values from 53.5 dB to 85.0 dB may be selected. The
repeater will not allow the user to set values outside this range. If a new filter set is required, the new
filter may be selected from the “Program a Filter page” below.
The user may select the desired filter by pressing the band/sub-band and modulation selection
buttons. Undesired bands/sub-bands if lit will require the user to manually “deselect” them before
programming. Pressing the Program button will complete the selection and load the desired filter.
The time required to complete this process will take just a few moments. Note: If the filter desired
is not currently in the unit, additional filters along with instructions on how to load them are
available by contacting CSI.
RF Configuration:
Program a Filter:
Summary of Contents for CSI-DSP85-PS7
Page 1: ...CSI DSP85 PS7 CSI DSP85N PS7 CSI DSP85 PSS8 CSI DSP85N PSS8 Installation Manual...
Page 2: ......
Page 39: ...39 Notes...
Page 40: ...960 1041 005 rev B ECO 2241...
