manualshive.com logo in svg

CSI CSI-DSP85-C, Installation Manual

Share
Download
CSI CSI-DSP85-C Installation Manual Download Page 22

-23 -

By clicking System Health the current state of the repeater can be reviewed.

***The user may clear LED indicators, alarms and the Event Log by clicking the Clear Log button.

   ***

System Health:

Should a software install or upgrade be needed it can be done from the Install & Upload screen
shown below. As with the other screens it can be reached by clicking the words in the
navigation box. Contact CSI for updates and instructions.

Install  & Upload:

Note:The System Health screen
        to the left is that of a Cellular
        model. PCS models will
        show PCS data.

****

 

If required in your market, visit the “System Health” screen and click on “Trigger Test Alarm”

and wait for confirmation that the Wireless Service Provider representative that is responsible
for monitoring the repeater has been notified of the alarm. Be sure to “Clear All Logs” prior to

logging out of the Web Interface.

****

Summary of Contents for CSI-DSP85-C








































Reviews:

No comments

Brands by name

Popular brands

Load more brands