CSI CSI-DSP85-C, Installation Manual

Page: 20 / 39

- 21 -
If the user would like to modify RF configuration click on the words RF Configuration in the
navigation box and the screen below is displayed.
The user may select the desired filter by pressing the band/sub-band and modulation selection
buttons. Undesired bands/sub-bands if lit will require the user to manually “deselect” them before
programming. Pressing the Program button will complete the selection and load the desired filter.
The time required to complete this process will take just a few moments. Note: If the filter desired
is not currently in the unit, additional filters along with instructions on how to load them are
available by contacting CSI.
To change gain settings the user will select the Uplink only or Uplink and Downlink radio buttons.
The user then inputs the gain value desired. Gain values from 53.5 dB to 85.0 dB may be selected.
The repeater will not allow the user to set values outside this range. By pressing the Change
Settings button the gain change is implemented. When a new filter set is required, it may be
selected by clicking Program a Filter in the navigation box.
RF Configuration:
Program a Filter:
Note:The RFConfiguration screen above is that of a PCS model.
Cellular models will show Cellular data.
Note: The screen above is that of a PCS model.
Cellular models will show Cellular data.